Application of Cables in Natural Gas Liquefaction Equipment
1.Scenario Introduction
Natural gas liquefaction is an important technology to convert natural gas into liquid state at low temperature for storage and transportation. With the transformation of the global energy structure, liquefied natural gas (LNG) is becoming more and more significant in the energy market due to its high efficiency, cleanliness, ease of transportation and other characteristics. As a key link in this industry chain, the stability and safety of the liquefaction equipment’s cable system is crucial.
2.Pain point analysis
During the operation of natural gas liquefaction equipment, the cable system often faces harsh environments such as extreme low temperatures, high pressures, and corrosive gases, which puts high demands on the cold resistance, corrosion resistance, and electrical performance of cables. Traditional cables are often difficult to work stably for a long time in such an environment, which can easily lead to signal transmission interruptions, equipment downtime and even cause safety accidents.
3.Natural gas liquefaction equipment on the cable requirements
Low-temperature resistance: able to maintain normal operation at temperatures of -160℃ or even lower.
Corrosion resistance: able to resist the corrosive components that may be contained in natural gas.
High electrical performance: to ensure the stability and accuracy of data transmission.
High mechanical strength: Resist the vibration and stress that may occur during the operation of the equipment.
4.Natural gas liquefaction equipment cable certification standards
Natural gas liquefaction equipment cable products should be through such as IEC, UL, CSA and other international or domestic certification, especially for the extreme low-temperature environment of the special certification to ensure that the quality and performance of the cable to meet industry standards.
5.Cable Selection
For the special needs of natural gas liquefaction equipment, TST CABLES recommends the use of special low-temperature cables. These cables use special insulation materials and structural design to maintain excellent electrical performance and mechanical strength at extremely low temperatures.
Selection parameters for reference (can be customized according to actual needs)
Temperature resistance: -60 to 180°C
Insulation strength: >100Mpa
Tinned copper
Oxidation resistance
High conductivity
Resistant to ultra-low temperature
Anti-freezing, cold-resistant
Excellent mechanical properties
Excellent electrical insulation properties
Good chemical stability
6. Product Characteristics
Low temperature resistance: special materials can work normally under -196℃ liquid nitrogen temperature.
Corrosion resistance: the outer sheath is made of corrosion-resistant materials, effectively resisting the erosion of corrosive gases.
Excellent electrical performance: the optimized selection of conductor and insulation materials ensures the stable transmission of signals.
High mechanical strength: special structural design enhances the cable’s tensile and vibration resistance.
Recommended Products
Natural gas liquefaction equipment cables are anti-oxidation, high conductivity, anti-freeze and cold-resistant and play a key role in the liquefaction process, converting natural gas into liquid form for storage and transportation.
7.Technical Test
To ensure the quality and performance of the cable products for natural gas liquefaction equipment, TST CABLES conducts a series of rigorous technical tests. These tests include electrical performance tests, mechanical performance tests, environmental adaptability tests and safety performance tests. The test results show that the cable products in this solution can fully meet the requirements of natural gas liquefaction equipment.
8.Natural gas liquefaction equipment cable laying installation and commissioning
Laying: According to the layout and working environment of the liquefaction equipment, reasonably plan the direction and fixing method of the cable.
Installation: Ensure that the cable is firmly connected and the joints are well sealed to prevent the intrusion of corrosive gases.
Commissioning: TST CABLES conducts comprehensive testing after the cable installation to ensure error-free data transmission and stable electrical performance.
9.After-sales maintenance & technical support
TST CABLES understands the importance of after-sales maintenance and technical support for customers. Therefore, we provide comprehensive after-sales maintenance and technical support services. Once customers encounter any problems during the use of natural gas liquefaction equipment cables, our professional team will respond quickly to provide effective solutions and technical support. In addition, TST CABLES also provides customers with regular advice on the maintenance and upkeep of natural gas liquefaction equipment cable products to ensure the long-term stable operation of the cables.
10.Practical Cases
In a large-scale natural gas liquefaction project in China, the special cryogenic cables provided by TST CABLES were successfully applied to the control system and data transmission of the liquefaction equipment. In a year-long operation, the cable system showed excellent low-temperature resistance and stability without any failure. The accuracy of data transmission reached 99.99%, providing a solid guarantee for the stable operation of the liquefaction equipment.
TST CABLES natural gas liquefaction equipment cable solutions can meet the stringent requirements of liquefaction equipment in extreme environments, providing stable and reliable data transmission and power supply, which is the ideal choice for the natural gas liquefaction industry.
Other solutions for cables in oil & gas applications.
WHY CHOOSE TST
10 years of experience
Specializing in the production of railway cables for 10 years
Engineer-to-engineer one-on-one support
Engineers provide one-on-one service to assist with product selection and problem-solving
Customization according to requirements
With a strong R&D team, we support customized cables based on specific needs
Quality certification
Stringent adherence to industry standards, complete certification
Fully testing facilities
Various tests based on customer requirements
10,000 ㎡ factory
Welcome to visit our factory face to face
RELATER NEWS
This post is also available in: Arabic English German Indonesian Japanese Russian Spanish Thai Vietnamese Portuguese (Brazil)